Skip to product information
1 of 6


ūüĒ• Solution Welding Flux-Cored Rods

ūüĒ• Solution Welding Flux-Cored Rods

Regular price GH‚āĶ250.00
Regular price Sale price GH‚āĶ250.00
Sale Sold out

The¬†Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair‚Äď no expensive equipment required.

Makes a sound joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength. 

Product Benefits:

  • The easy-to-melt welding¬†rods are¬†high-quality special¬†rods that are mainly used for welding / brazing aluminum and aluminum alloys.¬†However, they can also be used for hard welding non-ferrous metals other than stainless steel.
  • Applications include cargo areas, loading ramps, docks, diamond plates, irrigation lines, engine blocks, gearboxes, etc.


Welding Instructions:

Saker¬ģ Solution Welding Flux-Cored Rods


1. Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny.

2. Then evenly heat the area to be welded.

3. As you heat, rub the rod vigorously against the heated area until the rod starts flowing.

Caution: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds. 

Just a few of the many parts that can be easily repaired!

  • Material:¬†aluminum
  • Melting temperature:¬†380¬į C--400¬į C(716¬į F-- 752 ¬į F)melting temperature: 600¬įC(1112¬į F)
  • No leakage of gases or toxins, no lead material included.
  • Excellent corrosion resistance
  • Minimize the distortion of the starting material during welding.
  • Size: 50cm x 1.6mm. ( According to the manual measurement, there may be a subtle deviation. )
View full details